How do I stop the rotating blue light on my Alexa? (2023)

How do I stop the rotating blue light on my Alexa? (1)

What is the meaning of Alexa's spinning blue light? Alexa has a variety of light symbols, each representing a specific condition. You need to understand them if you want to buy an Echo device without a screen to enhance your Alexa experience.

The blue spinning light is among the most popular shades and there are a number of reasons why your Echo light is spinning blue.

Alexa's rotating blue light usually indicates that it is initiating or processing a voice command. In other situations, it could also suggest that your Alexa is updating her software or misinterpreted something you said as a voice command. It's also conceivable that your Alexa was stuck in pairing mode for a brief period.

A spinning light is usually not a cause for concern until it goes away. Our article will help you understand the basics of troubleshooting.

Alexa turning blue


Alexa and Echo stand out from first-generation voice assistants because of their reactivity. There are no buttons to press to start the system. If everything is in order and you're using the correct command, say the wake word (either "Alexa," "Echo," "Amazon," or "Computer") followed by whatever you want to do.

The Amazon Echo Blue Ring is the most visible light ring on the Amazon Alexa device. You'll get it every time you give Alexa a voice command. Alexa is usually inert until activated by the wake word (Alexa, Echo, Amazon, Computer).

Even if you're not actively using the smart speaker, the LED ring on top of the Echo and Echo Dot and a light bar on the Echo Show screen can turn on.

The blue ring on your Alexa device indicates that the request is being processed. Your Amazon Alexa device can pick up sounds from outside or from other family members talking in another room. In some cases, the Echo device has mistaken surrounding noises for voice instructions. Alexa lights up blue as it picks up and analyzes noise.

When you talk to Alexa, a blue light will appear with a light blue section pointing in the direction she's listening. A blue light will appear while Alexa analyzes what you just said. If there is no blue light, Alexa is not listening.

In the case of Amazon's Echo Show smart displays, the ring of light, or light bar, has been one of the brand's differentiating design features since the launch of the first Echo smart speaker.

When you say "Alexa," the light turns blue and spins as Alexa executes your spoken command. Normally the ring light is off. If your device has no lights when connected, it means the speaker is on and waiting for you to say the wake word.

When interacting with Alexa, you'll see white and various colors of blue. The light ring turns out to be both a status indication and a notification light for a variety of information. When the echo ring or program bar light up in different colors, Alexa is trying to tell you something important.

(Video) Alexa Echo Dot Spinning Blue and Green Light Ring - How do i fix it?

What is the Echo Dot Blue Ring of Death?

The "blue ring of death" is a common mistake customers make when using the Echo Dot or other Echo hubs and is a cause of great concern to many. Users often don't know they have this problem until they get involved with something else on their Amazon Echo Dot. In most cases, these issues are caused by a number of circumstances, with fake link cables being the most common.

It is also a term related to innovative home technologies created by big spenders online! The presence of a blue light denotes an error. The Blue Screen of Death first appeared with Windows XP and the Blue Light of Death first appeared with PlayStation 4. As a result, the phrase was born! The solid blue ring appears on top of an Amazon Echo device during processing of your inquiry, malfunction, or refusal to take action.

Why does my Alexa keep spinning blue?

Alexa light can change color; however, the default color is usually blue. As it "communicates" with you through the light, it's critical to understand how to interpret the light from Alexa. Let's look at some of the most common causes of this.

1. Low power supply

A problem with the power supply is one of the most common causes of Echo Dot blue Ring of Death. It's because your Echo Dot isn't getting enough power or a power surge has tripped the breaker most of the time. A power outage can be caused by a number of circumstances, including:

  • An ineffective AC adapter
  • A bad connection between the Echo Dot and the outlet
  • sloppy connections

The good news is that power supply problems are easy to fix. The techniques listed below may help resolve the issue:

  • Make sure you are using Amazon approved thread.
  • Examine the cable for connections where it connects to the adapter.
  • Make sure all cables are connected correctly, including the power cables and the Echo Dot speaker cable connections.
  • Replace any broken or damaged cables with new Amazon-approved cables.
  • If your power adapter is damaged, I recommend you buy this Amazon Echo Power Adapter from It's a 5 foot (1.52 meter) cable that's compatible with the Echo Spot and Fire TV Cube.

2. Software problem

Another important factor is the operating software problems of the Echo Dot Blue Ring of Death. In most cases, your Echo Dot turns blue due to bugs or software glitches that need to be resolved. These software glitches can, in some cases, cause other issues that culminate in the Blue Ring of Death. For example, software glitches can cause the Echo Dot to start up without verbal or physical prompts. These issues are caused by incomplete updates, incompatible apps, and outdated software.

The rotating blue light may turn on when you uninstall essential software before installing a new one. These software and hardware upgrades and downgrades can create problems with the software and hardware interface. One solution is to keep all of your Echo Dot's software as up-to-date as possible. You can also restart your Echo Dot by holding down the action button at the top of the device and selecting restart.

3. Wireless connectivity issues

Sometimes a problem with your Wi-Fi connection can cause the blue light on your Echo Dot to spin non-stop. If there's a problem with your internet connection, Alexa may be having trouble connecting.

Fortunately, you can resolve this issue by taking the actions below.

If you suspect a wireless connection issue, the following may help resolve the issue:

  1. Power cycle the Echo Dot to see if it works. If the problem is a temporary bug with Alexa's voice recognition, this step will fix it.
  2. Check the WiFi connection. You may need to update the software on the Echo Dot or change the wireless channel.
  3. For about 20 seconds, hold down both volume buttons.
  4. Check Amazon to see if there has been an update.

If none of the above solutions work, your Echo Dot may have a hardware problem. Contact Amazon for additional device warranty and troubleshooting assistance in this scenario.

4. animal

Among the most common reasons why Alexa turns on the blue light is a bug, which you can eliminate by restarting your device or updating the software.

5. A request you made is being processed

The most common cause of the rotating blue light on your smart speaker is that Alexa is recognizing your voice and preparing to execute your requests.

This is not to say that the blue light should flash every time the smart finder detects a disturbance. In that case, you should only see them after they wake up.

When Alexa recognizes your voice, it will turn on a solid blue light. The blue light will spin after you make a request, indicating that Alexa is running the whole "your wish is my command" thing.

You do not have to worry about that. Sit back and let Alexa take care of the details. That is what she intends to achieve.

(Video) How to reset the Amazon Echo dot Gen 1&2

If everything is in place and working properly, that rotating blue light should only blink a few times while Alexa makes her request before turning off.

6. Echo of misinterpreted sounds

It can be a bit annoying when Alexa starts flashing that weird blue light on your smart speaker even though you haven't said anything. But don't worry friend; Your house is not haunted as far as I know.

This is usually a clue that Alexa has mistaken some background noise for a wake up phrase. If that's the case, the steady blue light will flash in the direction of the noise.

It's unusual, but Alexa has also misinterpreted ambient sounds as a spoken command if the steady blue light starts spinning.

If the blue light starts spinning even though you haven't spoken a wake word, Follow Mode may have been activated, eliminating the need to precede a command with the wake word.

7. It is in pairing mode

Pairing is a standard procedure most wireless devices go through to connect and interact with each other. Pairing happens when you connect your Bluetooth headset to a computer or phone.

It would be better to pair your smart speaker with any other smart devices and your phone to provide a full range of services.

While in pairing mode, the blue light will rotate incessantly and Alexa will not detect the wake word or respond to any requests.

In that case, the only method to stop the blue light rotation is to complete the pairing procedure. It's something you can do on your phone:

  1. Turn on Bluetooth on your phone.
  2. Launching the Alexa app.
  3. Choosing the “Devices” menu.
  4. Choosing "Echo and Alexa".
  5. Select the device you want to pair with.
  6. Choose "Bluetooth Devices".
  7. "Add a new device."

8. The software is being updated

Your smart speaker is in pairing mode, and that's not the only reason it's constantly flashing its signature blue light. Your smart speaker and Alexa will likely receive a software update if all pairing is complete.

Firmware updates are sophisticated operating instructions created by the manufacturer. They are intended to increase the performance of an electrical device. Sometimes they are used to fix operating system crashes or problems. Sometimes firmware updates provide additional features to the device, making it even more useful.

While the update is in progress, Alexa won't respond to your commands... rude, I know, but don't worry about it. Everything should be back to normal once the new firmware update is complete, and Alexa will be your humble helper once again.

Check the Alexa app on your phone to make sure your wireless devices are connected. If you're wondering if Alexa's continuous rotating blue light is caused by a pairing issue or a software update.

9. Logic board problem

Logic board issues on the Echo Dot occur when the device is receiving power but won't boot up due to a system error.

The most common cause is an electrical short caused by water damage or a power surge. Sometimes it is a manufacturing fault, in which case you should contact customer service.

The blue light will remain on and the Alexa Voice Assistant will not activate. However, the problem is usually a software bug that can be fixed. If you're sure water has entered your Echo Dot, unplug it and wait 24 hours before turning it back on. Helps dry out components and prevent further damage.

(Video) ⛔️ Blue Ring of Death - Amazon Echo

The following changes may also help resolve logic board related issues:

Examine the Echo Dot logic board for swollen or leaking capacitors. They are located at the bottom of the logic board, next to the metal frame.

Replace capacitors showing similar symptoms and investigate other locations for evidence of liquid damage.

If you suspect your Echo Dot is flashing blue due to water damage, turn it off and wipe it down with a dry towel.

Once the fluid has been drained, contact customer service for more information on replacement options.

To repair logic board problems, you may need expert help at a local electronics store or manufacturer Amazon.

How to stop turning blue light not Alexa

If your Alexa has a spinning blue light and you're experiencing the infamous blue ring or death, there are ways to fix it and stop the problem. If there is a genuine problem with your Alexa and it's not just receiving commands, after diagnosing the exact problem using the explanations above, you should be able to fix it.

1. Make sure you are using Amazon certified cables

If you change your Alexa's power cord or plug, or if there's a short circuit, you could create an electrical problem in your device and cause the blue light to come on. get oneBrand new Amazon approved power cord (View on Amazon)and restart Alexa to resolve this issue.

2. Make sure the cables are connected correctly

This loose cable connection can cause your Alexa device to stop responding if one or more cables are not connected correctly. Be sure to double check all threads and use only those certified by Amazon. If one or more of the cables are not connected correctly, please do so, and if the device continues to turn the blue light, a reset or software update may be required. Check the cable for any broken links where it connects to the adapter. All cables are connected correctly, including the power cables and the Echo Dot speaker cable connections.

3. Replace the wires

One of the most common reasons for Alexa's rotating blue light is a faulty power supply. It's because your Alexa isn't getting enough power or a power surge has tripped the breaker most of the time. If a faulty cable connects your Alexa to the power outlet, consider replacing the cracked or damaged cables with new Amazon-certified cables.

4. Check if the capacitors are damaged on the logic board

Logic board issues on the Echo Dot occur when the device is receiving power but won't boot up due to a system error.

The following changes may also help resolve logic board related issues:

  • Examine the Echo Dot logic board for swollen or leaking capacitors. They are located at the bottom of the logic board, next to the metal frame.
  • Replace capacitors showing similar symptoms and investigate other locations for evidence of liquid damage.

5. Fix the internet connection

The blue light on your Echo Dot may start to spin if you have a WiFi connection problem. Alexa may not be able to connect to the Internet if there is a problem. Let's find out the possible reasons:

6. It's too far

Move it closer to your router to see if that helps. Keeping Alexa away from things like microwaves and baby monitors, which can cause interference, will also help.

7. The password you entered for your wireless network is incorrect

Your WiFi password must be entered correctly if it is password protected. Capitalizing your WiFi password is critical.

8. The WiFi Module is faulty

The WiFi module on your Echo's motherboard may be damaged and require motherboard replacement.

(Video) Alexa second gen stuck on loading

9. A problem with the router

The problem may be with your wireless router. You may want to try the following:

1. Reboot the wireless router if necessary. Immediately after turning off the router for 30 seconds, turn it back on. To avoid disconnecting all your Wi-Fi enabled devices, be careful.

2. After you reset your network, reconnect your Echo device. Turn off your network and all your connected devices for 30 seconds. After that, wake up your router and wait for the Echo to connect to your WiFi. Connect all other devices to your WiFi after the Echo is connected.

10. Update the software

If your Alexa device has a known issue, it may already have been fixed by Amazon in a recent firmware update.

Visiting the official Alexa website can tell you if your device's software needs an update.

In the Alexa app, choose Settings and check the "Device Software Version" area in the About section. Compare this with the current firmware version of your Alexa device.

11. Turn off Do Not Disturb

If this is your first time using an Echo Dot, it can be difficult to navigate the device.

The blue ring of death will activate if DND mode is accidentally activated. Alexa will not react to voice instructions while she is in this mode.

It is simple to disable DND mode. At the top of the Echo Dot, press the mute button. If you can't press this button, please uncheck "No interruptions" in the Alexa app settings and confirm the voice command.

Turning it off will resolve the Blue Ring of Death and restore Alexa's ability to react to voice instructions.

12. Stop all background noise

If Alexa's blue light doesn't turn off and keeps spinning, your Echo Dot has a problem. Low power supply, software challenges, and wireless connection difficulties are downsides. Or it could even be background noise that your device is processing as commands. Try to remove all background noise or move it to a space without it.

13. Turn off Alexa so she doesn't think you're in charge

Sometimes your Amazon Alexa device can pick up sounds from outside or other family members are talking in another room. In some circumstances, the Echo device perceived environmental sounds as voice instructions. Alexa lights up blue while capturing and processing noise.

If you didn't order your Echo device, wait for it to turn off or say "Alexa, pause."

The blue top ring will instantly disappear. If the ring is still spinning, restart your Echo device and it should go away.

14. Replace your Alexa Echo

Since replacing your Amazon Echo is the solution you probably didn't want to hear about, if you've discovered that your Alexa is broken and the problem goes beyond a simple beacon light, you'll need to replace it. If you have experience repairing your Echo and have the right tools, you should be able to fix it. Otherwise, you will need to go to a repair shop that can repair your Echo dot.

If there is no auto shop nearby, you canreplace your Amazon Echo (see on Amazon)🇧🇷 If you're on an older generation, upgrading to the fourth generation will reduce the number of issues you're having with your Amazon Echo and you'll no longer experience swirling blue light if it's due to an issue with your Echo. The Echo is relatively inexpensive, and having one that works properly is crucial to your home's comfort.

(Video) Alexa has a blue light!

15. Contact Amazon

If you tried all the fixes and for some reason you still can't get rid of Alexa spinning blue light issues, the last option iscontact amazon for a solution🇧🇷 If you couldn't fix it, it sounds like there is a deeper problem that needs to be diagnosed and fixed. You'll need to enter your Echo's information on Amazon's website, and then you'll have the option to send a message through their messaging system, call them, or request a service to repair your Echo.

oh take away

The Echo Dot blue ring of death is a serious problem that affects most owners. However, there is no need to panic as most of the problems can be solved without the help of a specialist.

After reading this guide, you should have a better idea of ​​what went wrong with your Echo Dot and how to fix it.


How do I get Alexa to stop spinning blue? ›

Unplug the Echo speaker, wait around 30 seconds, and plug it back in. Hopefully, the spinning blue lights that appear then turn off after a few seconds.

How do I turn off the circling light on my Alexa? ›

The yellow light ring is easy to fix. Just say “Alexa, read my messages” or “Alexa, show me the notifications” and the ring will disappear.

Why does Alexa light keep spinning? ›

Pairing Mode

But if you leave it in pairing mode, i.e., do not complete the pairing between the two devices, the blue ring will constantly spin. During this time, Alexa won't respond to trigger word, which means you can't use it. The solution to this problem is simple – you need to complete the pairing.

Why is my Alexa spinning a blue circle? ›

A cyan spotlight on a blue ring means that Alexa is listening. The light ring glimmers briefly when Alexa has heard and is processing your request. A briefly glimmering blue light might also mean the device is receiving a software update.

How can you tell if someone is listening on Alexa? ›

Turn on a notification sound to alert you when Alexa is listening to your conversation (using “Sounds” under “settings”). Turn off “personal results” from the Google Home app (under “settings” and “more”).

Why does Alexa keep spinning green and blue? ›

Alexa Guard is Set to Away Mode

If Alexa Guard is set to “Away Mode,” sometimes the devices begins to glitch, resulting in a spinning blue light. Often you can stop the spinning blue light by simply turning Away Mode off.


1. How can I Fix Amazon Alexa Dot Blue light of death???✔🏆
(Pierre Barr)
2. 8 Common Alexa & Amazon Echo Problems (2021) - How to Fix them!!
(Up on Top)
3. Echo Dot: Not Responding, Frozen or Not Working? FIXED!
4. How to FIX Amazon Echo that has STOPPED Responding
(My Mate VINCE)
5. How To Reset Echo Dot
(One Hour Smart Home)
6. How To Reset Echo Dot 4th Gen
(One Hour Smart Home)
Top Articles
Latest Posts
Article information

Author: Msgr. Refugio Daniel

Last Updated: 11/29/2022

Views: 6410

Rating: 4.3 / 5 (54 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Msgr. Refugio Daniel

Birthday: 1999-09-15

Address: 8416 Beatty Center, Derekfort, VA 72092-0500

Phone: +6838967160603

Job: Mining Executive

Hobby: Woodworking, Knitting, Fishing, Coffee roasting, Kayaking, Horseback riding, Kite flying

Introduction: My name is Msgr. Refugio Daniel, I am a fine, precious, encouraging, calm, glamorous, vivacious, friendly person who loves writing and wants to share my knowledge and understanding with you.