Shark Dust Brush Roller Indicator Light Is Not On - A Troubleshooting Guide (2023)

Shark Dust Brush Roller Indicator Light Not On - A Troubleshooting Guide

Vacuum cleaners equipped with advanced technologies are one of the greatest boons. They help us keep our house clean without wasting a lot of time and energy.

But even when using vacuum cleaners from some of the most well-known brands on the market, such as B. Shark, we sometimes have to face frustrating bugs like:Shark vacuum brush roller indicator light is not lit.

➜ RELATED:

These problems are common and easy to fix if we know some simple and actionable tips. This troubleshooting guide to resolving the Shark vacuum brush roller indicator light not on issue first explains what is causing it and then suggests some quick and easy ways to fix it.

1. Why does Shark include the indicator light in its vacuum cleaners?

Shark Vacuums has stood the test of time for its reliable yet affordable vacuum cleaners. The company has developed a number of different branches, handhelds and robots to meet the needs of different customers. On some of their newer stick vacuums, the brushroll is designed to penetrate deeper into the carpet fiber to pick up the most embedded dust, dirt, and pet hair.

It is powered by two Power Belts that activate two different colored lights. The brushroll activates when users pull down on the handle to release the roller. So what role does the Shark vacuum brush roller indicator light play? Shark includes this feature to avoid possible brushroll damage. The light will illuminate to alert users to potential issues they may be encountering with the brush.

If the indicator light is green, it is working properly. On the other hand, the red Shark brushroll indicator light indicates that the brushroll is blocked or overheated. So if it's red from overheating, it's best to stop vacuuming and set it aside to cool.

➜ RELATED: How to clean the Shark vacuum How to clean the Shark vacuum filter

But if your traffic light is red because of a blockage, then solving the problem requires more effort. So you need to look for other solutions to fix the problem and I'm going to give you some simple tips below to get your vacuum working again.

Now what if your shark vacuum brush roller indicator light doesn't come on? This could indicate a more serious problem underneath. Don't worry! I'll show you some easy and quick solutions to solve the problem. So read on as I continue my research.

Brushroll indicator light does not come on or turns red. Easy to fix. Via: Amazon

2. Why is the Shark vacuum brush roller indicator light not on and how to fix it?

2.1. Incorrect position of the power switch

As obvious as it may sound, sometimes the brushroll indicator shark doesn't turn on just because the power button's modes aren't in the right position. However, you need to check both modes: I and II.

Mode I should only be activated when the brush roll starts to run, while mode II gives the brush roll full mileage. Therefore, owners must check whether these two modes are in a suitable position. Otherwise the indicator lamp will not light up.

➜ RELATED: How to clean a vacuum filter: useful tips and tricks

2.2. Broken brush roller belt

As explained briefly above, the roller brush is operated by two belts connected to two indicator lights. Therefore, when the belt is old and worn, it tends to break easily, which means that the check engine light will not come on. You can replace the belt with a new one by following the steps below:

• Be sure to order the correct belt for your Shark vacuum model.
• Unplug the vacuum and lay it on the floor so you can easily access the belt from underneath.
• Remove the brushroll cover, panels and electrical connectors.
• Remove the rotating brush.
• Slide out the brush roll to access the belt.
• Gently remove all dirt and debris from the rotating brush, being careful not to damage the bristles.
• Insert the new belt with the visible letters facing up.
• Adjust the belt and make sure the motor shaft is holding one side of the belt while the rotating brush is holding the other side.
• Now test if the belt moves properly.

It is always strongly recommended to unplug the unit from the mains before attempting to service it.

2.3. blocked brush roller

Sometimes the brushroll indicator light won't come on just because it's completely blocked. This means no current can flow which causes some problems with the indicator lights working in the brushroll. If this is the case, Shark vacuum owners will need to clear the blockage by following the steps below:

• Turn off and unplug the vacuum cleaner before performing any inspections.
• Place it on a flat, solid surface (preferably the floor).
• Take off the brush roll.
• Use a small brush to remove any dirt caught in the roller.
• If there is curly hair, you need to use scissors to trim it. A razor blade can also be used here, but be careful not to accidentally cut the wiring inside.
• Reinstall the brushroll and make sure the light is on.

2.4. Overheated vacuum

An overheated vacuum is one of the most common reasons why the brushroll indicator light won't come on. If your machine is too hot, this can also cause your Shark vacuum cleaner brush not to rotate.

➜ RELATED:How to clean the Shark vacuum brush for each model

This is a common problem, but it's probably one of the easiest problems to fix. Just solve it by:

• Turn off the machine.
• Disconnect immediately if you notice any unusual changes in brushroll speed, sound, or indicator light.
• Let it cool down for about 10 to 15 minutes
• Place it on a flat, solid surface and remove its trash can.
• Clean your vacuum's body and HEPA filter with a soft-bristled brush.
• Let sit for 45 minutes to an hour.

3. Tips on how to properly clean and care for your Shark vacuum cleaner

In so many casesBug fix for Shark vacuumThey are not complicated processes that require technical skills or tools. For minor issues like the Shark vacuum brush roller indicator light not coming on, homeowners only need to fix a few simple maintenance-related issues to avoid potential problems. However, let's learn how to properly clean and maintain your Shark vacuum.

➜ RELATED:How to Make Your Vacuum Cleaner Smell Better - Why Does My Vacuum Cleaner Smell?

3a. Disassemble and inspect your vacuum cleaner

• Turn off your device and unplug the power cord.
• Remove dirt chamber, filter and hose.
• Check every corner of each component for possible blockages.
• Use a brush to remove dirt, dust, and debris (if any).
• Use a clean, dry cloth to clean all opening areas.

3b. clean the garbage

• Open the Trash and empty all of its contents.
• Wash the trash can (if possible) with warm water and apply soap if necessary.
• Use a brush to remove any residue left in the container.
• Wash the container thoroughly with soap and water.
• Wipe the inside of the trash can with a clean cloth.
• Set aside to dry.

3c. Clean the filters

Most high-end upright Shark models come with both foam and HEPA filters. Because their design is a little different, users need to maintain them differently:

Follow these steps to clean the HEPA filter:

• Open the top cover to remove the HEPA filter.
• Wash it well with warm water.
• Clean and let dry for a day.

Follow these steps to clean the foam filter:

• Hold the foam filter firmly under a cold running water faucet.
• Wash it well until the water runs clear.
• If necessary, apply soap and wash again.
• Pat dry and set aside until completely dry.

Keeping filters clean regularly is an important step in the maintenance process Via: Amazon

3d. Clean suction hose

• Detach the hose.
• Clean it under running water with soapy water.
• Make sure all content has been removed to avoid blocking.
• Rinse again and hang the tubing on a hook to dry overnight.
• Replace components when dry.

➜ RELATED: How often should you vacuum? - The complete guide to vacuuming at home

the bottom line

There are many reasons why you might see yoursShark vacuum brush roller indicator light is not lit🇧🇷 Unfortunately, it's pretty common, and even thosebest shark vacuumcan lead to this problem for your customers after intensive use on different floor coverings.

The good news is that fixing this malfunction is not difficult and you can do it by following the simple steps given above. Regardless of how long your vacuum cleaner lasts, however, regular maintenance is always recommended. Regular cleaning ensures optimal performance of your machine.

I hope you got some useful tips and guides from this article. Feel free to leave your questions and comments below. We will contact you soon.