Vizio TV stuck downloading updates (11 solutions) (2023)

If your VIZIO TV gets an upgrade, chances are it will suck. This can make it difficult to use your smart TV and watch some of the shows you want.

What to do if your Vizio TV gets stuck downloading updates?First, cancel an update and restart your TV. To do this, press the menu button on your TV remote control andChoose System > Reset & Manage > Soft Power On..If it didn't work, do a power reset on your TV. Turn off your TV, unplug it, wait 1-2 minutes and plug it back in. After that, restart the update.

Let's take a look at some of the factors that go into your VIZIO upgrade and how you can detach your TV when upgrading.Consult the list of The best streaming devices now on Amazon!

Table of Contents

How long does it take for a VIZIO to update?

The good news is that the VIZIO Smart TV doesn't take as long to complete as some other TVs you may have used in the past. While this depends on the update being performed and your internet speed, most VIZIO updates take a few minutes to complete.

You can turn on the update, do a few things around the house, and get back to watching your favorite show instead of waiting all day.

(Video) Fix Vizio TV Stuck On Downloading Updates

How do you know your VIZIO TV is getting an update?

If you have a newer VIZIO Smart TV, you might not know it's even being updated. These updates are automatic and occur when you turn off your TV.

When the TV is turned on again, the update will stop. This can prevent updates from running if you just want to enjoy your favorite TV show on Netflix.

However, older VIZIO televisions do not carry out these automatic updates. You must update manually to get the new features. You'll know the TV is updating because you'll need to confirm it.

During the manual update, your TV will restart several times to complete the update. You will be notified when the full update is complete.

Why is it taking so long to update my VIZIO TV?

Most of the time, your VIZIO TV will complete the update in just a few minutes. This can be done with the TV turned off in most cases, although you will need to manually restart your old TV to install any necessary updates.There are several aspects that slow down the updates made on your VIZIO Smart TV.

  • Weak internet connection.If the internet connection is not strong enough, it will slow down the update and can cause your TV to hang during an update.It's a good idea to check the speed limits and see how they work with any updates you might want to make to the TV.
  • Configure the router settings.You may need to configure your router settings to get the widest possible bandwidth. This will make the update speed a bit faster and it can prevent your TV from getting stuck. Consider using an Ethernet cable for a faster connection.

What to do if VIZIO TV stuck downloading updates?

Sometimes your VIZIO TV gets stuck while downloading some updates. This can be frustrating and make it difficult to use your TV and watch the shows you want.There are a few steps you can take to help your VIZIO TV unblock downloads. These include:

1. Check the Internet

The main reason why your VIZIO TV gets stuck downloading is that your internet connection is slow or you have other problems. It might be a good idea to run a speed test to see how your internet connection is performing.

Changing the position of the router can also help. Putting it a little closer to the TV can speed things up.

(Video) How to Update Software on Vizio Smart TV - Fix it Now

Sometimes WiFi is the problem. Connect the Smart TV to a modem instead of the router. This speeds things up and can give you the fastest internet connection you need.

2. Restart your TV

Once you've verified that everything is fine with your WiFi connection, the next thing you should try is simply restarting your TV. Your TV may get stuck downloading updates due to a minor software bug. If that's the case, a TV reset should fix the problem.

To do this, press the Menu button on your TV remote and select System > Reset & Manage > Smooth Power Cycle. After you choose the gentle power cycle, your Vizio TV will shut down and restart. After the process is complete, try to download the updates.

3. Restart your TV

This is my personal favorite way to fix almost any TV problem. You can find it in every other post here on my blog. You know why? Because it works like magic.

  • turn off your tv
  • Separate it from the wall
  • Wait 1-2 minutes
  • plug it back in

Give your TV a few minutes to configure itself, then turn it on and try downloading any updates.

4. Try a different network

It's best to try the tip above to check the internet and see if speed is the problem.If you've tried some of the options above and are still having trouble with the update, consider switching to a new network.

Try connecting to a different network at home, then continue with the update. Many owners may not know it, but their cellular network is different from the router's network.

If the router isn't working, see if you can connect the Smart TV to the hotspot on your phone to see if that helps.

(Video) Vizio Smart TV: Factory Reset without Remote Control (Buttons on TV)

5. Reboot your router

Try restarting yoursRouter. Routers can experience connectivity issues over time if they are running for long periods of time. Sometimes a simple power cycle can fix things. Before you start poking around in your router, make sure other devices in your home are connecting to the WiFi network. If it doesn't connect, the problem probably isn't with your TV, it's more likely a connection issue.

6. Use an Ethernet cable

Let's try aEthernet cableto connect your TV directly to the router. This can be helpful if there are problems with your wireless connection. This also gives you a faster connection speed and helps your updates load eventually.

7. Check for interference

Some electronic devices can cause your WiFi connection to fail. Check the following:

  • They have a couple of routers on the same frequency. Such disturbances can often occur if you live in a block of flats. Try changing the frequency and see if it helps.
  • Make sure there are no electronic devices, such as microwave ovens, near your TV or router.

8. Power Cycle

A power cycle will fix problems with your TV to reset it to factory settings. This can be effective, but it will erase some of your settings.

Your TV will warn you that this is also an extreme option. Some of the steps you need for the Power Cycle include:

  1. Turn off the TV
  2. Unplug the TV from the outlet.
  3. Press and hold the power button on the TV. This must be done for 15 seconds to drain the remaining energy.
  4. Turn off your modem or router.
  5. Plug the TV back into the power outlet.
  6. Turn the TV back on with the remote control.
  7. Turn on the modem or router and connect the TV.

This should provide a good reset for the TV to work and break away from the desired update.

9. UseA2.4 GHz wireless connection

First, change the name of your WiFi hotspot. This involves finding your WiFi settings and naming your 2.4 and 5.0 wireless connections differently, then turning on your TV and connecting to the 2.4GHz wireless connection. Or vice versa, if you were using a 2.4GHz connection, switch to 5.0GHz, that should speed things up for you.

10. Skip the update

This tip is almost the last on our list. If none of the above steps helped, you can just skip the update entirely by clicking the Skip button on the Software Update tab.

(Video) How To Fix VIZIO SmartCast TV Not Working Properly - 5 Easy Way To Solve The Problem

We really don't recommend it as your TV will definitely benefit from all the new updates by getting the latest firmware and new security features. So if you want your TV to work better and longer, you should try to fight this problem instead of forgetting it.

11. Contact Vizio

The last thing you should try is to contact Vizio directly or the store/company where you bought the TV. Hopefully it's still under warranty and if there are any problems with your TV they'll fix it for free.Consult the list of The best streaming devices now on Amazon!


Today we have shared all the tips that can help you to solve the problem that your Vizio TV is stuck downloading updates. It can be very annoying when you thought it would only take a few minutes, but it takes much longer and you don't know what to do.

Vizio TV stuck downloading updates (11 solutions) (1)

James Peterson

(Video) Vizio TV Apps not working - Fix it Now

Hello technology lovers! My name is James, I'm an admin and a frequent contributor to this blog. I'm a tech geek, so on this blog I want to share all my knowledge with you to make your tech life a little easier.


2. Firestick won't Update - Fix it Now
(Studio 6060)
3. Vizio TV Rebooting itself-Do This Before You Call Vizio Customer Service
4. How to setup and download Updates on Vizio D Series Smart TV with Smartcast
(Tom Leeman)
5. VIZIO Support | Checking Your Firmware
(Electronic Secret)
Top Articles
Latest Posts
Article information

Author: Horacio Brakus JD

Last Updated: 01/03/2023

Views: 5861

Rating: 4 / 5 (71 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Horacio Brakus JD

Birthday: 1999-08-21

Address: Apt. 524 43384 Minnie Prairie, South Edda, MA 62804

Phone: +5931039998219

Job: Sales Strategist

Hobby: Sculling, Kitesurfing, Orienteering, Painting, Computer programming, Creative writing, Scuba diving

Introduction: My name is Horacio Brakus JD, I am a lively, splendid, jolly, vivacious, vast, cheerful, agreeable person who loves writing and wants to share my knowledge and understanding with you.